SKU:
Sirona CEREC SpeedFire
$8,948.00
$8,948.00
per item
Sinter and Glaze with CEREC SpeedFire
Full contour zirconia restorations in one session.
CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can sinter a crown in typically 10–15 minutes. The strengths of full contour zirconia can thus also be used for chairside treatment. If required, a glaze can be applied with the CEREC SpeedGlaze that can be fired in just a few minutes in the CEREC SpeedFire. Then the restoration is ready to be placed into the patient’s mouth.
Technical data
Technical data for the CEREC SpeedFire
Model designation:
CEREC SpeedFire
Type of protection against electric shock:
Protection Class I de
vice
Degree of protection against ingress of water:
Ordinary device (
without protection against ingress of
water)
Setup location:
Indoors in dry area
Operating altitude:
≤ 2000 m above sea level
Temperature range:
5°C to
35°C (41°F to 95°F)
Relative humidity
max. 80%
Pollution degree:
2
Mode of operation
Continuous operation
Dimensions of unit (W x H x D in mm):
250 x 425 x 425
Dimensions of packaged unit (W x H x D in mm):
400 x 600 x 500
Furnace chamber:
Diameter 38 mm x 20 mm height
Maximum sintering temperature:
1600°C (2912°F)
Approx. weight without packaging:
21 kg
Approx. weight including packaging:
30 kg
Rated line voltage:
AC 100V - 240V
Rated power frequency:
50/60Hz
Admissible line voltage fluctuations:
±10% of nominal voltage
Power consumption:
max. 1200 W
Interfaces:
2x USB 2.0
1x LAN (RJ45)
WLAN (optional via WLAN USB dongle
Scope of delivery and accessories
Furnace
Power cable
Restoration holder (“Glazing Support Single Unit” and “Glazing
Support Multi Unit”)
Top and bottom door insulation
Positioning pin for door insulation
CEREC SpeedPaste
CEREC Zirconia Shade Guide
Tweezers
USB-WLAN adapter
Ferrite core
Network cable
Product safety with the power cable
In order to ensure product safety, this device may be operated
only with
original Sirona accessories or third-party accessories expressl
y approved
by Sirona. In particular, only the power cable supplied with th
e unit or the
corresponding original spare part may be used with the unit. Th
e user
assumes the risk of using non-approved accessories.
Full contour zirconia restorations in one session.
CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can sinter a crown in typically 10–15 minutes. The strengths of full contour zirconia can thus also be used for chairside treatment. If required, a glaze can be applied with the CEREC SpeedGlaze that can be fired in just a few minutes in the CEREC SpeedFire. Then the restoration is ready to be placed into the patient’s mouth.
Technical data
Technical data for the CEREC SpeedFire
Model designation:
CEREC SpeedFire
Type of protection against electric shock:
Protection Class I de
vice
Degree of protection against ingress of water:
Ordinary device (
without protection against ingress of
water)
Setup location:
Indoors in dry area
Operating altitude:
≤ 2000 m above sea level
Temperature range:
5°C to
35°C (41°F to 95°F)
Relative humidity
max. 80%
Pollution degree:
2
Mode of operation
Continuous operation
Dimensions of unit (W x H x D in mm):
250 x 425 x 425
Dimensions of packaged unit (W x H x D in mm):
400 x 600 x 500
Furnace chamber:
Diameter 38 mm x 20 mm height
Maximum sintering temperature:
1600°C (2912°F)
Approx. weight without packaging:
21 kg
Approx. weight including packaging:
30 kg
Rated line voltage:
AC 100V - 240V
Rated power frequency:
50/60Hz
Admissible line voltage fluctuations:
±10% of nominal voltage
Power consumption:
max. 1200 W
Interfaces:
2x USB 2.0
1x LAN (RJ45)
WLAN (optional via WLAN USB dongle
Scope of delivery and accessories
Furnace
Power cable
Restoration holder (“Glazing Support Single Unit” and “Glazing
Support Multi Unit”)
Top and bottom door insulation
Positioning pin for door insulation
CEREC SpeedPaste
CEREC Zirconia Shade Guide
Tweezers
USB-WLAN adapter
Ferrite core
Network cable
Product safety with the power cable
In order to ensure product safety, this device may be operated
only with
original Sirona accessories or third-party accessories expressl
y approved
by Sirona. In particular, only the power cable supplied with th
e unit or the
corresponding original spare part may be used with the unit. Th
e user
assumes the risk of using non-approved accessories.
