Zubler VARIO 200
Z-DRY MODE
bild02For optimal pre-drying, to avoid cracks and blisters, it is best to pre-dry at a constant temperature of 130°C. Utilizing the symmetrical lift design, chamber temperature and lift position, the VARIO 200/200ZR maintains the optimal pre-dry temperature. By reading the chamber temperature, the VARIO 200/200ZR will adjust the lift to compensate for any changes in the radiant temperature. The advantages:
Cracks or blisters are prevented by controlled drying with the
Z-Dry Mode.
In subsequent firings you save wait-time thanks to the Z-Dry Mode. The work can be placed on the firing tray well before the programmed start temperature has been attained.
TOUCH GLASS DISPLAY
Made of Safety Glass
The innovative and modern touch glass display is made of impact and heat-resistant safety glass. This has proven to be a clean, comfortable and virtually indestructible solution when compared with a membrane keyboard. We now offer a LIFETIME WARRANTY on the glass!
OMNI VISIBLE DISPLAY
Optimum visibility from all viewing angles – even at greater distances and under difficult lighting conditions such as bright sunshine.
USB CONNECTION
Simple data transfer and program backup.
bild02For optimal pre-drying, to avoid cracks and blisters, it is best to pre-dry at a constant temperature of 130°C. Utilizing the symmetrical lift design, chamber temperature and lift position, the VARIO 200/200ZR maintains the optimal pre-dry temperature. By reading the chamber temperature, the VARIO 200/200ZR will adjust the lift to compensate for any changes in the radiant temperature. The advantages:
Cracks or blisters are prevented by controlled drying with the
Z-Dry Mode.
In subsequent firings you save wait-time thanks to the Z-Dry Mode. The work can be placed on the firing tray well before the programmed start temperature has been attained.
TOUCH GLASS DISPLAY
Made of Safety Glass
The innovative and modern touch glass display is made of impact and heat-resistant safety glass. This has proven to be a clean, comfortable and virtually indestructible solution when compared with a membrane keyboard. We now offer a LIFETIME WARRANTY on the glass!
OMNI VISIBLE DISPLAY
Optimum visibility from all viewing angles – even at greater distances and under difficult lighting conditions such as bright sunshine.
USB CONNECTION
Simple data transfer and program backup.
Zubler VARIO 200ZR
TTC-MODE
TTC schwarzThe firing of dental ceramics on zirconia sub-structures carries a high risk of crack formation while cooling. With the VARIO 200ZR the new TTC technology is at your disposal. When engaged, this feature controls the rate of temperature descent, linearly dropping the temperature by a user defined degree per minute to evenly cool the objects and avoid sudden changes in temperatures. This feature allows for cool rates between 5 °C/min and 45 °C/min. Thanks to the innovative design of the firing chamber and intelligent software, the actively controlled temperature descent of the ceramic below the temperature of transition is ensured. This process will help keep the occurrence of chipping, cracking and micro-fractures to a minimum.
There is a considerable difference between the available and usable space inside a ceramic oven. The available space is generally considered to be the diameter of the firing tray plus the working height. The usable space, conversely, includes the thermal conditions of a firing chamber.
The heating coils used in ceramic ovens radiate at temperatures far above 1000°C during the sintering phase. Consequently, temperatures in direct proximity to the heating coil are ‘useless’ for consistent results when processing dental ceramics.
Zubler is the only ceramic oven manufacturer in the world to address this problem and develop a firing chamber with a larger inner diameter. The VARIO 200 series ceramic oven’s 120mm inside diameter ensures temperature homogeneity across the entire 80mm-diameter firing tray, irrespective of the position or number of objects.
TTC schwarzThe firing of dental ceramics on zirconia sub-structures carries a high risk of crack formation while cooling. With the VARIO 200ZR the new TTC technology is at your disposal. When engaged, this feature controls the rate of temperature descent, linearly dropping the temperature by a user defined degree per minute to evenly cool the objects and avoid sudden changes in temperatures. This feature allows for cool rates between 5 °C/min and 45 °C/min. Thanks to the innovative design of the firing chamber and intelligent software, the actively controlled temperature descent of the ceramic below the temperature of transition is ensured. This process will help keep the occurrence of chipping, cracking and micro-fractures to a minimum.
There is a considerable difference between the available and usable space inside a ceramic oven. The available space is generally considered to be the diameter of the firing tray plus the working height. The usable space, conversely, includes the thermal conditions of a firing chamber.
The heating coils used in ceramic ovens radiate at temperatures far above 1000°C during the sintering phase. Consequently, temperatures in direct proximity to the heating coil are ‘useless’ for consistent results when processing dental ceramics.
Zubler is the only ceramic oven manufacturer in the world to address this problem and develop a firing chamber with a larger inner diameter. The VARIO 200 series ceramic oven’s 120mm inside diameter ensures temperature homogeneity across the entire 80mm-diameter firing tray, irrespective of the position or number of objects.
Zubler VARIO PRESS 300
An efficient heating chamber helps guarantee consistent pressing. To ensure all ring sizes are uniformly heated, the VARIO PRESS 300/300.e are equipped with a larger, high-quality heating element that completely lines the firing chamber with 7 layers of heating coils (see ADVANCED PRESS™ techniques). Zones without direct radiation that cause uneven heating are avoided.
The ring in the VARIO PRESS 300 is positioned on a tripod insert and is raised inside the firing chamber during the entire work process.
This ensures the necessary heat reflection inside the firing chamber and thus perfect pressing.
SAFETY THROUGH PFC
(Power-Fail-Control)
If the power goes out, PFC is activated! Once power is restored the oven operation is returned to the point of interruption.
TOUCH GLASS DISPLAY
Made of Safety Glass
The innovative and modern touch glass display is made of impact and heat-resistant safety glass. This has proven to be a clean, comfortable and virtually indestructible solution when compared with a membrane keyboard. We now offer a LIFETIME WARRANTY on the glass!
The ring in the VARIO PRESS 300 is positioned on a tripod insert and is raised inside the firing chamber during the entire work process.
This ensures the necessary heat reflection inside the firing chamber and thus perfect pressing.
SAFETY THROUGH PFC
(Power-Fail-Control)
If the power goes out, PFC is activated! Once power is restored the oven operation is returned to the point of interruption.
TOUCH GLASS DISPLAY
Made of Safety Glass
The innovative and modern touch glass display is made of impact and heat-resistant safety glass. This has proven to be a clean, comfortable and virtually indestructible solution when compared with a membrane keyboard. We now offer a LIFETIME WARRANTY on the glass!
Zubler VARIO PRESS 300.e
ADVANCED PRESS PROCESS
ADVANCEDPRESS weissLithium disilicate ceramics are increasingly used in the dental laboratory for the manufacture of dental prosthesis. This material is characterized by its high strength. While CAD/CAM processing is an option, pressing technology is more efficient and accessible.
Unfortunately, the pressing process has been hindered by the sensitive nature of lithium disilicate and the formation of reactive layers caused by the material's exposure to phosphate bonded investment during the traditional heating and pressing process. This reaction layer adds complexity and increases processing time.
ADVANCED PRESS was patented in 2010 and includes an entirely new pressing process. By calculating the thermal behavior between the materials involved in the pressing cycle, a heating curve was developed that vastly improves the result and decreases the process time. The principle is simple and easy to understand
An efficient heating chamber helps guarantee consistent pressing. To ensure all ring sizes are uniformly heated, the VARIO PRESS 300/300.e are equipped with a larger, high-quality heating element that completely lines the firing chamber with 7 layers of heating coils (see ADVANCED PRESS™ techniques). Zones without direct radiation that cause uneven heating are avoided.
The ring in the VARIO PRESS 300 is positioned on a tripod insert and is raised inside the firing chamber during the entire work process. This ensures the necessary heat reflection inside the firing chamber and thus perfect pressing.
ADVANCEDPRESS weissLithium disilicate ceramics are increasingly used in the dental laboratory for the manufacture of dental prosthesis. This material is characterized by its high strength. While CAD/CAM processing is an option, pressing technology is more efficient and accessible.
Unfortunately, the pressing process has been hindered by the sensitive nature of lithium disilicate and the formation of reactive layers caused by the material's exposure to phosphate bonded investment during the traditional heating and pressing process. This reaction layer adds complexity and increases processing time.
ADVANCED PRESS was patented in 2010 and includes an entirely new pressing process. By calculating the thermal behavior between the materials involved in the pressing cycle, a heating curve was developed that vastly improves the result and decreases the process time. The principle is simple and easy to understand
An efficient heating chamber helps guarantee consistent pressing. To ensure all ring sizes are uniformly heated, the VARIO PRESS 300/300.e are equipped with a larger, high-quality heating element that completely lines the firing chamber with 7 layers of heating coils (see ADVANCED PRESS™ techniques). Zones without direct radiation that cause uneven heating are avoided.
The ring in the VARIO PRESS 300 is positioned on a tripod insert and is raised inside the firing chamber during the entire work process. This ensures the necessary heat reflection inside the firing chamber and thus perfect pressing.
Zubler VARIO S400
The importance of the sintering process in the manufacture of restorations from zirconium oxide in everyday laboratory practice has long been underestimated. Dental Concept Systems sets new standards with the new VARIO S400 sintering system and benefits from the many years of experience of Zubler Gerätebau. New dyeing options before the sintering process and a wide variety of materials require further processing options that hardly any sintering furnace on the market can offer.
Advantages of the VARIO S400
Effective sintering times through fast heating and cooling phases
Automated cleaning program for the complete sintering chamber
Preset and safe sintering programs with free programmability for speed and long-term programs
Advantages of the VARIO S400
Effective sintering times through fast heating and cooling phases
Automated cleaning program for the complete sintering chamber
Preset and safe sintering programs with free programmability for speed and long-term programs
DC VARIOscan 28
DC1 milling system for the modern dental laboratory6
Dental Concept Systems has completed its range with the DC1™ and now also off ers a basic device in the compact class of modern milling systems.
The DC1™ makes it possible for dental laboratories of all sizes to be extremely competitive and off ers dental technicians a smooth entry to CAD/CAM technology.
Features of the DC1™
System freedom
Modular construction according to individual needs
5-axis milling system, simultaneous
Dry and wet milling
For zircon oxide, ceramic materials, lithium disilicate, CoCr, titanium, PMMA, composites, wax and model materials
Exchangeable 18-tool magazine with automatic tool measurement and management of twin tools
Automatic machine calibration for maximum precision
Synergy in manufacturing throughDC conceptCONTROL
The DC conceptCONTROL control software and the modular construction support the combination of DC1™ and DC5™ and off ers a wide range of options for the extension of dental productions.
Dental Concept Systems has completed its range with the DC1™ and now also off ers a basic device in the compact class of modern milling systems.
The DC1™ makes it possible for dental laboratories of all sizes to be extremely competitive and off ers dental technicians a smooth entry to CAD/CAM technology.
Features of the DC1™
System freedom
Modular construction according to individual needs
5-axis milling system, simultaneous
Dry and wet milling
For zircon oxide, ceramic materials, lithium disilicate, CoCr, titanium, PMMA, composites, wax and model materials
Exchangeable 18-tool magazine with automatic tool measurement and management of twin tools
Automatic machine calibration for maximum precision
Synergy in manufacturing throughDC conceptCONTROL
The DC conceptCONTROL control software and the modular construction support the combination of DC1™ and DC5™ and off ers a wide range of options for the extension of dental productions.
VARIOstar
Performance
Stable torque through the entire speed range,
simple operation and good solid performance
make this handpiece a reliable and down-toearth
partner for your dental laboratory.
Optimal Service
Long working life, minimal downtime, low
service costs and service direct from the
manufacturer.
100% compatible
with your suction system
We guarantee 100 % compatibility with your
existing suction system. Regardless of the brand
you use, just connect and work clean
- handpiece recognition is guaranteed to work.
Lifetime guarantee
Brushless handpiece - Lifetime warranty on the
armature and winding, 12-month warranty on
all consumable parts.
Ergonomic
The VARIOstar D50 handpiece is easy to grip,
comfortable and supports fatigue-free work.
Compatible with C2 series
Profi/Master
The Control units K50/D50 and the VARIOstar
handpiece are both compatible with C2 Profi/
Master.
Made in Germany
Electronics from Zubler are synonymous with
long life and quality. Place your trust in our
good name.
Knee control or tabletop unit
Select your appropriate control unit.
Knee control unit
Tabletop unit
Stable torque through the entire speed range,
simple operation and good solid performance
make this handpiece a reliable and down-toearth
partner for your dental laboratory.
Optimal Service
Long working life, minimal downtime, low
service costs and service direct from the
manufacturer.
100% compatible
with your suction system
We guarantee 100 % compatibility with your
existing suction system. Regardless of the brand
you use, just connect and work clean
- handpiece recognition is guaranteed to work.
Lifetime guarantee
Brushless handpiece - Lifetime warranty on the
armature and winding, 12-month warranty on
all consumable parts.
Ergonomic
The VARIOstar D50 handpiece is easy to grip,
comfortable and supports fatigue-free work.
Compatible with C2 series
Profi/Master
The Control units K50/D50 and the VARIOstar
handpiece are both compatible with C2 Profi/
Master.
Made in Germany
Electronics from Zubler are synonymous with
long life and quality. Place your trust in our
good name.
Knee control or tabletop unit
Select your appropriate control unit.
Knee control unit
Tabletop unit
VARIO BALANCE
Fast & Precise dosing for investment,
gypsum, acrylic and more!
Eliminates the errors caused by graduated cylinders!
Extremely consistent results
Highly accurate, maximum error rate (< 1%)
Minimal effort with maximum accuracy.
„More accurate than the human eye.“
Precise expansion control
By measuring the liquid and powder directly in the mixing bowl, the results remain consistent every time you dose. You now know the precise contents of the powder and all liquid components. Graduated cylinders are obsolete and investment package accuracy is now revealed.
Consistent results
The current conventional methodology of graduated cylinders, pre-measured packages, inaccurate scales and scaled measuring devices produce error rates in excess of <10%. With the Vario Balance, the error rate is very minimal (<1%). The final result is the ultimate combination of consistency and control for producing higher quality, perfect fits and reduced production time.
Design concepts
The integrated user interface of shatter-resistant safety glass with touch function is not only timeless, it can also be convenient, easy to clean and maintain.
Return on investment
The enormous improvement in quality control and time-savings allow the VARIO BALANCE to pay for itself in a short amount of time!
gypsum, acrylic and more!
Eliminates the errors caused by graduated cylinders!
Extremely consistent results
Highly accurate, maximum error rate (< 1%)
Minimal effort with maximum accuracy.
„More accurate than the human eye.“
Precise expansion control
By measuring the liquid and powder directly in the mixing bowl, the results remain consistent every time you dose. You now know the precise contents of the powder and all liquid components. Graduated cylinders are obsolete and investment package accuracy is now revealed.
Consistent results
The current conventional methodology of graduated cylinders, pre-measured packages, inaccurate scales and scaled measuring devices produce error rates in excess of <10%. With the Vario Balance, the error rate is very minimal (<1%). The final result is the ultimate combination of consistency and control for producing higher quality, perfect fits and reduced production time.
Design concepts
The integrated user interface of shatter-resistant safety glass with touch function is not only timeless, it can also be convenient, easy to clean and maintain.
Return on investment
The enormous improvement in quality control and time-savings allow the VARIO BALANCE to pay for itself in a short amount of time!
